General Steps
1. Disconnect the Battery: This is crucial for safety as it prevents any electrical shocks while working on the wiper mechanism.
2. Locate the Wiper Arm Nut: This is usually located under a plastic cover on the wiper arm. It's often a 10mm or 12mm nut.
3. Remove the Wiper Arm Nut: Use a wrench or socket to loosen and remove the nut.
4. Pull Up on the Wiper Arm: Gently pull upward on the wiper arm to release it from the wiper shaft.
5. Repeat for the Other Wiper Arm: Follow the same steps for the other wiper arm.
Safety Precautions
* Always wear safety glasses: This protects your eyes from flying debris.
* Use caution when handling the wiper arms: They can be sharp and heavy.
* Avoid over-tightening nuts: This can damage the wiper mechanism.
Additional Tips:
* Use a lubricant like WD-40: This can help loosen the wiper arm nut if it is stuck.
* Mark the wiper arm position: This will make it easier to re-install the arms in the correct position.
* Consult your vehicle's repair manual: This will have detailed instructions for your specific model.
Important Note: Replacing a wiper motor can be a complex task depending on your vehicle's design. It's advisable to consult a qualified mechanic if you are unsure about the process or have any concerns. They can provide expert advice and ensure the job is done correctly.
Remember, this information is for general guidance only. Always refer to your vehicle's repair manual for specific instructions and safety precautions.
