Method 1: Using the Trip Odometer Button
1. Turn the ignition to the "ON" position. (Do not start the engine).
2. Press and hold the "Trip" button on the instrument cluster. This is typically the button used to cycle through trip odometer readings.
3. Keep holding the button until the maintenance light blinks. Once it blinks, you can release the button.
4. Turn the ignition off.
The maintenance light should now be reset.
Method 2: Using the Accelerator Pedal
1. Turn the ignition to the "ON" position. (Do not start the engine).
2. Press the accelerator pedal to the floor three times. You should hear a beep after each press.
3. Turn the ignition off.
The maintenance light should now be reset.
Important Notes:
* Consult your Owner's Manual: The most accurate and specific instructions for your vehicle will be in the owner's manual.
* Make sure your maintenance is actually completed: Resetting the light without performing the necessary maintenance could lead to future problems with your vehicle.
* If neither method works: It's possible your vehicle requires a different procedure or may have a fault. Consult your local Honda dealer or a qualified mechanic.
Let me know if you have any other questions!
