* Dead battery: This is the most common cause of starting problems. Test the battery voltage.
* Faulty starter: The starter motor might be failing.
* Bad ignition switch: The switch that turns the ignition on might be worn out or damaged.
* Wiring problems: A corroded or damaged wire in the ignition system could prevent the car from starting.
* Security system (if aftermarket): If someone installed an aftermarket alarm or security system, that could be the culprit. Check its manual or the installation details if you have them.
Troubleshooting Steps:
1. Check the battery: Have the battery tested at an auto parts store to ensure it's holding a charge and has sufficient cranking amps.
2. Check for obvious wiring issues: Look for any damaged, frayed, or disconnected wires under the hood and in the ignition area.
3. Try jump starting: If the battery is weak, try jump-starting the car to see if it starts. This helps rule out a battery issue.
4. Listen for starter engagement: When you turn the key, do you hear a clicking sound? This could indicate a faulty starter or a problem with the solenoid.
5. Check the ignition switch: This is harder to diagnose yourself, but a faulty ignition switch is a possibility.
6. Examine the fuel system: Make sure you have gas, and check if the fuel pump is working.
If you've checked these and still can't start your car, it's best to take it to a qualified mechanic for diagnosis and repair. They have the tools and expertise to pinpoint the problem accurately. Don't assume it's an immobilizer issue when it's highly unlikely to be the case for a 1995 Camaro Z28.
