1. Preparation:
* Park the car: Ensure the car is parked on a level surface and the ignition is off.
* Inspect the wiper arms: Take a moment to carefully examine how the wiper blades are attached to the arms. This will help you determine the best approach. There's usually a clip or a button involved.
2. Removing the Wiper Blade:
* Locate the release mechanism: Most likely, you'll find a tab or a small button on the wiper arm itself, near where the blade connects. This tab or button needs to be pressed or moved to release the blade. It might be on the top, side, or bottom of the wiper arm connection.
* Lift and slide: Once you've located and activated the release mechanism (if there is one), gently lift the blade away from the wiper arm. It might slide off, or simply lift off once released.
* If there's no obvious release: Some wiper arms might require a bit more force. You might need to firmly but gently pry the blade away from the arm. Use a flat, blunt tool (like a plastic putty knife) if needed to avoid scratching the arm. Be very careful not to break the wiper arm.
Important Considerations:
* Consult a repair manual: A repair manual specific to your 1987 Pontiac Fiero will provide the most accurate and detailed instructions for wiper blade removal.
* Photos: Before you start, take a picture of the wiper arm and blade connection. This will be helpful if you have trouble remembering how to reattach the blades.
* Be gentle: Avoid using excessive force as this can damage the wiper arm or the wiper blade.
* Replacement: Once the old blades are off, install the new ones following the same procedure in reverse. Make sure they're properly seated.
If you're still having trouble after trying these steps, you might want to search online for "1987 Pontiac Fiero wiper blade removal" with images. Visual guides are often helpful. You could also consult a local mechanic for assistance.
