Where is the best place to jack change a rear tire on my windstar van?

The best place to jack up a Ford Windstar to change a rear tire is on the reinforced frame near the jacking point. Consult your owner's manual for the exact location. It will usually be a reinforced section of the frame, often near the rear axle, clearly marked (sometimes with a small symbol) or implied by a slightly wider section of the frame.

Important Considerations:

* Owner's Manual: Your owner's manual is crucial. It will show the exact location of the jacking points, the type of jack to use (most Windstars require a floor jack or a suitable jack), and the correct jacking procedure. Ignoring this can damage your vehicle.

* Level Surface: Always jack up the van on a level, hard surface. Soft ground can cause the jack to sink.

* Wheel Chocks: Use wheel chocks on the wheels that are *not* being lifted to prevent the vehicle from rolling.

* Parking Brake: Engage the parking brake firmly.

* Jack Stands (Highly Recommended): Never work under a vehicle supported only by a jack. Use jack stands placed securely on the frame near the jacking point to support the vehicle's weight *after* it's lifted with the jack. This is a critical safety precaution.

* Lug Wrench: Have a properly sized lug wrench readily available.

Attempting to jack up the vehicle in an incorrect location can damage the undercarriage. Always prioritize safety and refer to your owner's manual.