1. Locate the power steering fluid reservoir: This is usually a clear or translucent container with markings indicating minimum and maximum fill levels. Consult your owner's manual for the precise location if you're unsure.
2. Use a bulb-type suction tool or a turkey baster: Carefully remove the excess fluid from the reservoir. Avoid getting fluid on your skin or clothes, as it can be irritating. Use a shop rag to wipe up any spills.
3. Check your fluid level: Once you've removed some fluid, check the level again. The fluid level should be between the minimum and maximum fill lines, ideally closer to the maximum.
4. Start the car and turn the steering wheel: Turn the steering wheel slowly from lock to lock several times to circulate the fluid. This helps to ensure that air bubbles are removed and the system is properly bled. Check the level again after this. It might have dropped slightly after running the system. If necessary, add a very small amount of fluid to reach the correct level.
5. Inspect for leaks: While you're under the hood, inspect the power steering hoses, pump, and rack and pinion for any signs of leaks. Overfilling could indicate a problem elsewhere in the system.
Important Considerations:
* Type of fluid: Use only the correct type of power steering fluid specified in your owner's manual. Using the wrong fluid can damage the system.
* Severe overfilling: If you significantly overfilled the reservoir, the excess fluid might have been forced into other parts of the system. In this case, you might need to have a mechanic check the system for damage. You might notice symptoms like whining noises from the power steering pump.
* Professional help: If you're uncomfortable performing this task yourself, it's best to take your Chrysler 300 to a qualified mechanic.
Overfilling the power steering system can cause damage, including damage to the power steering pump. It's crucial to address it promptly and correctly.
