* A new key fob
* A screwdriver
* A pen or pencil
Instructions:
1. Turn the ignition switch to the "Off" position.
2. Locate the programming connector under the seat of the motorcycle. It is a small, black connector with two wires.
3. Remove the seat of the motorcycle by unscrewing the two screws that hold it in place.
4. Connect the red wire from the programming connector to the positive terminal of the motorcycle battery.
5. Connect the black wire from the programming connector to the negative terminal of the motorcycle battery.
6. Insert the new key fob into the ignition switch and turn it to the "On" position.
7. Press and hold the unlock button on the key fob for 10 seconds.
8. Release the unlock button and press and hold the lock button on the key fob for 10 seconds.
9. Turn the ignition switch to the "Off" position.
10. Disconnect the red and black wires from the programming connector.
11. Reinstall the seat of the motorcycle.
The new key fob is now programmed and ready to use.
