How to Clean Car Seats Without Leaving Water Stains

Cleaning car seats isn’t something you can’t do on your own, but you need to be extremely careful. If not done right, washing car seats will leave ugly water stains for you to deal with. Your seats might end up looking even worse than before. Car seat cleaning is a job best left to the professionals, but if you insist on DIY, it helps to learn how to clean car seats without leaving water stains. 

Today, we will share some tried and tested tips and tricks to avoid water stains on your car seats. 

Why Does Water Leave Stains on Car Seats?

Usually, water stains are left behind on car seats when you clean them with a liquid mixture and forget to wipe the seat with a dry cloth, it also happens when water spills on the car seats. After the water evaporates, a mark of mineral deposits in the form of dark stains is formed on the car seats. These stains leave a very bad impression on your car’s interior. 

How to Clean Car Seats without Leaving Water Stains

Cleaning water stains off your car seats is not a difficult task. You wouldn’t even need to spend much on the car seat cleaning equipment since you might just have most of the required items at home. 

The following items are needed to clean car seats effectively:

• Car vacuum: First of all, vacuum all the dust and debris in your car’s interior, including the dirt stuck on and between the car seats. If you skip this step, darker stains will be formed on the seat after the dust comes in contact with moisture. 
• Dry foam cleaner or an upholstery/rug shampoo: Choose the proper upholstery cleaner or dry foam cleaner depending on the texture of your car seat (fabric, leather, suede, vinyl etc.). Use the cleaner on the entire seat and wipe off the mixture with a microfiber cloth after scrubbing the seat or else it will leave water stains. 
• Homemade cleaning mixture: You can also use a homemade cleaning mixture to the seats and to get rid of water stains on car seats. Take equal amounts of white vinegar and distilled water and apply it to the entire seat.
• Brush: With a soft-bristled brush, work the cleaner into the seat material, this ensures traces of mineral deposits and dirt gets removed entirely. However, be gentle, brushing the cleaning mixture too hard in the seats can damage your seat covers.
• Towel: Wipe the seats with a dry towel, preferably a light-coloured one. Never use a wet or slightly moist towel that drips water on the seat because then the entire purpose of cleaning car seats without leaving water stains will be destroyed.
• Fan or blow-dry: Please always roll down your car windows down for the drying process. This is a common-sense practice that many people miss out when cleaning car seats. You can also use a fan or a blow-dry to accelerate the drying process. 
• Baking soda: If you want to know how to clean car seats with baking soda, that is also pretty simple. Take equal parts of baking soda and warm water, dip a small brush, preferably a toothbrush in the mixture and scrub away the dirt on your car seats. 

Don’t get too carried away, while scrubbing the dirt off because aggressive cleaning can actually damage your car seats. Be gentle, once done, wipe away the mixture with a small amount of cold water followed by a dry towel pat, and finally allow the seats to dry. Here are a few tips to protect your car’s interior.

How to Clean Leather Car Seats

If you’re specifically looking to clean leather seats, the entire process remains same, you’ll just have to buy a good quality leather conditioner. After the car seats are scrubbed with the cleaning mixture and the seats are dry, you can apply the leather conditioner and protect it from further stains. 

The best way to clean water stains from cars is to start with the cleaning and drying process as soon as the water spills. In case, you notice a water stain after cleaning your car, clean that area again and make sure you roll down your car window or use a hairdryer to dry out the moisture.  

Pro tip: If you want to deep clean the car and get rid of the dirt underneath the seats, here is how you can remove the car seats properly.

How to clean car seat belts

Now that you know how to clean car seats without leaving water stains, let us go through the process of cleaning car seat belts. To clean seat belts you will need the following items:

• Warm water in a cup or a spray bottle 
• Baby shampoo 
• Toothbrush
• Soft cloth

The process of cleaning car seat belts is pretty simple. Using baby shampoo or a mild shampoo is the most popular car seat belt cleaning tip of all time. Add in half a cup of shampoo in a cup of warm water and scrub the car seat belt with a toothbrush. You can also mix water and shampoo in a spray bottle and spray it over the seat belt before scrubbing the dirt off. 

When done, wipe off the mixture with a soft cloth. You can dip the soft cloth in a tiny amount of cold water to clean the mixture. Roll down your windows and allow the car seat belt straps to dry. 

By now, you must have a clear idea about cleaning car seats at home without leaving water stains. Remember, cleaning your car’s interior including seats is an important part of vehicle care. Make sure your car is well-organised and neat. Here are a few useful car cleaning tips that will help keep your vehicle tidy inside out.

Stay tuned to the UAE’s top car blog for more on car cleaning tips, DIY solutions and car care.