- Safety glasses
-Gloves
-Socket set
-Wrench set
-Flat-head screwdriver
-New starter motor (if applicable)
Procedure:
1. Disconnect the battery: Before starting any work, disconnect the negative terminal of the car battery to avoid any electrical accidents.
2. Locate the starter: The starter is located on the passenger side of the engine near the back. It is usually a cylindrical metal object with wires connected to it.
3. Remove protective covers: There might be protective covers around the starter. Remove them to access the starter motor.
4. Disconnect electrical connections: Disconnect the electrical connections to the starter motor. There should be two or three wires connected to the starter. Ensure you label the wires to reconnect them correctly later.
5. Remove the mounting bolts: Use the socket set to remove the mounting bolts that hold the starter in place. Be careful not to drop the bolts into the engine compartment.
6. Remove the starter: Once the mounting bolts are removed, you should be able to slide the starter out of its housing. Be careful not to damage any of the surrounding parts as you remove the starter.
7. Remove the heat shield (if applicable): Some Escalade models may have a heat shield around the starter. If so, remove the bolts holding the shield in place and remove the heat shield.
8. Install a new starter (if applicable): If you are replacing the starter, reverse the steps to install the new starter motor. Make sure to use the appropriate torque specifications for the starter mounting bolts.
9. Reconnect the electrical connections: Reconnect the electrical connections to the starter motor, ensuring they match the way you labeled them before disconnecting.
10. Reconnect the battery: Reconnect the negative terminal of the car battery.
11. Test the starter: Start the engine to ensure the starter is working correctly.
Note: If you are unsure about any of these steps or do not have the necessary tools, safety precautions, and knowledge, it is recommended to seek help from a qualified mechanic.
