* Phillips head screwdriver
* Flat head screwdriver
* T15 Torx bit
* Pry tool
Instructions
1. Open the door and remove the two screws that are located in the door handle recess.
2. Use the pry tool to carefully pry up the edge of the door panel.
3. Continue to pry up the door panel until it pops off of the door.
4. Disconnect the electrical connectors that are connected to the door panel.
5. Remove the door panel from the door.
Additional Information
* Some models of the Dodge Nitro may have additional screws that need to be removed in order to remove the door panel.
* Be careful not to damage the door panel or the door when prying it off.
