Auto >> AutoSPT >  >> Auto Repair

How do you reset a 1991 corvette instrument cluster after have installed new one My tackometer and gauges work?

To reset the instrument cluster on a 1991 Corvette after installing a new one, follow these steps:

1. Turn the ignition key to the "On" position, but do not start the engine.

2. Simultaneously press and hold the "ODO" and "Trip" buttons on the instrument cluster.

3. Continue to hold the "ODO" and "Trip" buttons until the display on the instrument cluster begins to flash.

4. Release the "ODO" and "Trip" buttons.

5. Use the "Up" and "Down" buttons on the instrument cluster to select the desired setting ("Odo," "Trip 1," or "Trip 2").

6. Press the "ODO" or "Trip" button again to confirm the selection.

7. The instrument cluster will then display the reset value.

8. Turn the ignition key to the "Off" position.

Note: If the instrument cluster does not display the reset value after completing these steps, repeat the process from step 1. Additionally, if the instrument cluster does not reset after following these steps, you may need to consult with a qualified mechanic or automotive electrician for further assistance.