* Phillips-head screwdriver
* Flat-head screwdriver
* Socket wrench with a 10mm socket
* A pry tool
Instructions:
1.) Open the door and remove the two Phillips-head screws that hold the door handle in place.
2.) Use the pry tool to pry the door handle out of the door.
3.) Disconnect the electrical connector for the door handle.
4.) Remove the two 10mm bolts that hold the door panel in place. These are located at the bottom of the door panel, near the kick panel.
5.) Use the flat-head screwdriver to pry up the door panel clips. There are a total of 10 clips. Start at the bottom of the door panel and work your way up.
6.) Once all of the clips have been removed, lift the door panel up and off of the door.
7.) Disconnect the electrical connector for the window switch.
8.) Remove the two bolts that hold the door lock cylinder in place. These are located on the inside of the door, near the door handle.
9.) Remove the door lock cylinder.
10.) Disconnect the electrical connector for the door lock cylinder.
11.) Remove the two bolts that hold the window regulator in place. These are located at the top of the door, near the window.
12.) Lower the window regulator out of the door.
13.) Disconnect the electrical connector for the window regulator.
14.) Remove the two bolts that hold the door mirror in place. These are located at the top of the door.
15.) Pull the door mirror out of the door.
