* Phillips head screwdriver
* Flat head screwdriver
* Trim removal tool (optional)
Instructions:
1. Open the rear door of your RAV4.
2. Locate the two screws at the bottom of the door panel. Remove these screws with a Phillips head screwdriver.
3. Locate the plastic cover at the top of the door panel. Pry off this cover with a flat head screwdriver. Be careful not to damage the cover.
4. Locate the three screws behind the plastic cover. Remove these screws with a Phillips head screwdriver.
5. Gently pull the door panel away from the door, starting at the bottom. The panel is held in place by clips, so you may need to use a trim removal tool to help you release the clips.
6. Disconnect the electrical connectors at the back of the door panel.
7. Remove the door panel from the door.
Reinstalling:
To reinstall the door panel, simply follow the instructions in reverse order.
