Here's a general guide on how to do this:
1. Turn off the power: Make sure the power to the light fixture is turned off either at the light switch or by flipping the breaker associated with the light fixture.
2. Remove the light fixture cover: This may be held in place by screws, clips, or magnetic attachments. Locate these and use a screwdriver or your hands to remove the cover.
3. Remove the old bulbs: Once you have access to the interior of the light fixture, identify the old bulbs that need to be replaced. Depending on the type of fixture, the bulbs may be held in place by clips or screws. Gently twist the bulb counterclockwise while pulling down to remove it.
4. Install the new bulbs: Take the new bulbs and screw them into the sockets where the old bulbs were. Make sure the bulbs are secure but do not overtighten them.
5. Reattach the light fixture cover: Once the new bulbs are installed, replace the light fixture cover. Secure it with the screws, clips, or magnetic attachments that you removed earlier.
6. Turn on the power: Once everything is securely in place, turn on the power to test that the new bulbs are working properly.
During this process, make sure to note any parts you remove and ensure they are properly replaced to avoid any safety hazards. If you encounter any difficulties or have any remaining questions, it's best to refer to the specific instructions provided by the light fixture manufacturer.
