- Replacement Fog Light Bulb
- Socket Wrench (with extension)
- Philips-Head Screwdriver
- Pliers
- Electrical Tape
Procedure:
1. Park your car on a level surface and turn off the engine.
2. Engage the parking.
3. Open the hood of your car and locate the fog light assembly.
4. If necessary, remove the plastic cover or grille from the fog light assembly.
5. Turn the socket counterclockwise to loosen and remove the fog light bulb from the assembly.
6. Check the bulb and replace if necessary.
7. Insert the new bulb into the socket and turn clockwise to secure it in place.
8. If necessary, replace the plastic cover or grille.
9. Close the hood of your car.
Additional tips:
* Be sure to use the correct size and type of bulb for your vehicle.
* If you have difficulty removing the plastic cover or grille, you may need to use a pry bar or pliers.
* Be careful not to drop the bulb. If you do, it may shatter and cause injury.
