Tools and Materials Needed:
- New wiper blades (correct size for your vehicle)
- Clean rag
- Spray bottle filled with water
Instructions:
1. Lift the Wiper Arm:
- Turn off the engine and ensure that the windshield wipers are in the "parked" position (resting at the bottom of the windshield).
2. Unhook the Old Wiper Blade:
- Locate the small release lever on the wiper arm. It is usually located near the base of the wiper blade.
- Press and hold the release lever while pulling the wiper blade away from the wiper arm. The blade should come off easily.
3. Clean the Wiper Arm:
- Use a clean rag and the water-filled spray bottle to clean the wiper arm. Remove any dirt, dust, or debris that may have accumulated on the arm. This ensures a smooth and proper operation of the new wiper blade.
4. Attach the New Wiper Blade:
- Take the new wiper blade and align it with the wiper arm. Make sure that the hook or connector on the new blade aligns with the release lever on the wiper arm.
- Press the new blade firmly onto the wiper arm until it clicks into place and the release lever engages.
5. Lower the Wiper Arm:
- Carefully lower the wiper arm back to its original position.
6. Repeat for the Other Wiper Blade:
- Follow steps 2-5 to replace the wiper blade on the other side of the vehicle.
7. Test the Wiper Blades:
- Once both wiper blades are replaced, turn on the windshield wipers to make sure they are functioning properly. Test them on both high and low settings.
8. Dispose of Old Wiper Blades:
- Properly dispose of the old wiper blades by recycling them or throwing them away responsibly.
That's it! You have successfully replaced the wiper blades on your 1997 Mercedes E320. Remember, it's important to replace wiper blades regularly to maintain good visibility during inclement weather conditions.
