1. Park your Discovery 3 on a level surface and turn off the engine.
2. Open the hood and remove the two bolts that secure the top of the bumper to the radiator support.
3. Remove the two bolts that secure the bumper to the wheel wells.
4. Remove the four nuts that secure the bumper to the chassis.
5. Carefully pull the bumper away from the vehicle.
6. Disconnect the electrical connectors for the fog lights and parking sensors (if equipped).
7. Remove the bumper from the vehicle.
To reinstall the bumper, follow these steps in reverse order.
Tips:
* It may be helpful to have a second person assist you when removing and reinstalling the bumper.
* Be careful not to damage the paint on your vehicle when removing or reinstalling the bumper.
* Make sure that all of the bolts and nuts are tightened securely before driving your vehicle.
