2. Open the trunk.
3. Locate the tail light assembly that needs to be replaced.
4. Remove the two screws that hold the tail light assembly in place.
5. Disconnect the electrical connector from the back of the tail light assembly.
6. Remove the tail light assembly from the vehicle.
7. Transfer the light bulb from the old tail light assembly to the new tail light assembly.
8. Reinstall the tail light assembly in the vehicle.
9. Reconnect the electrical connector.
10. Replace the two screws that hold the tail light assembly in place.
11. Close the trunk.
12. Test the tail light to make sure it is working properly.
