1. Park your car in a safe location and turn off the engine.
2. Open the trunk of your car.
3. Locate the tail light assembly. It is located on the side of the trunk.
4. Remove the two screws that hold the tail light assembly in place.
5. Pull the tail light assembly out of the trunk.
6. Locate the brake light bulb. It is a red bulb located at the bottom of the tail light assembly.
7. Twist the brake light bulb counterclockwise to remove it from the socket.
8. Insert the new brake light bulb into the socket.
9. Twist the brake light bulb clockwise to secure it in place.
10. Reinstall the tail light assembly into the trunk.
11. Secure the tail light assembly with the two screws that you removed earlier.
12. Close the trunk of your car.
Now, the rear brake light bulb has been replaced successfully!
