- A small flat-head screwdriver
- A Phillips-head screwdriver
- A pair of needle-nose pliers
- A new clock light bulb (part number: 34901-S01-003)
Instructions:
1. Park your CR-V in a safe location and turn off the engine.
2. Open the driver's side door and locate the clock assembly. It is located on the center console, just above the audio controls.
3. Use the small flat-head screwdriver to pry up the plastic bezel around the clock assembly. Be careful not to damage the bezel.
4. Once the bezel is removed, use the Phillips-head screwdriver to remove the two screws that hold the clock assembly in place.
5. Disconnect the electrical connector from the back of the clock assembly.
6. Use the needle-nose pliers to carefully remove the old clock light bulb from its socket.
7. Insert the new clock light bulb into the socket.
8. Reconnect the electrical connector to the back of the clock assembly.
9. Replace the two screws that hold the clock assembly in place.
10. Snap the plastic bezel back into place.
11. You have now successfully replaced the clock light on your 2011 Honda CR-V. Test the new light to ensure that it is working properly.
