1. Gather Supplies:
- Replacement wiper blade (same size as your old one)
- A clean cloth
- A flat-head screwdriver or a wiper blade removal tool
2. Prepare for Replacement:
- Turn off your vehicle's engine.
- Ensure your parking brake is engaged for safety.
3. Locate the Release Lever:
- Lift the rear wiper arm until it's almost perpendicular to the glass.
- Look for the release lever on the wiper arm. It's usually a small, plastic tab or button located near the base of the wiper arm.
4. Release the Wiper Blade:
- Press or slide the release lever to disengage the wiper blade from the arm.
5. Remove the Old Blade:
- Lift the old wiper blade up and away from the wiper arm. It should come off easily once the release lever is disengaged.
6. Clean the Wiper Arm (Optional):
- Use a clean cloth to wipe the wiper arm free of any dirt or debris.
7. Install the New Blade:
- Align the hook or connector of the new wiper blade with the wiper arm.
- Press down on the blade until it snaps into place. Make sure it's securely attached to the arm.
8. Lower the Wiper Arm:
- Gently lower the wiper arm back to its normal position.
9. Check the Connection:
- Ensure that the new wiper blade is firmly connected to the wiper arm and that the release lever is properly engaged.
10. Test the Wiper:
- Start the vehicle and activate the rear wiper. Make sure the new wiper blade moves smoothly and wipes the rear windshield effectively.
By following these steps, you can successfully replace the rear wiper blade on your Hyundai Tucson and ensure clear visibility during adverse weather conditions. Remember, it's important to inspect and replace your wiper blades regularly for optimal performance and safety.
