- new CV boot
- two screwdrivers
- pliers
- wire brush
- grease
- jack
- chock
Procedure:
1. Loosen the lug nuts on the left front tire but do not remove them completely.
2. Jack up the car and place a chock behind the right rear wheel.
3. Remove the lug nuts and take off the tire.
4. Use a screwdriver to pry the old boot off of the axle. You can also do this with pliers.
5. Clean the axle shaft with a wire brush and apply a coat of grease.
6. Slide the new boot over the axle shaft.
7. Use a screwdriver to snap the boot into place.
8. Replace the tire and lug nuts, then lower the car.
