- Replacement brake light bulbs (check your owner’s manual for the correct type)
- Screwdriver
- Socket wrench
Instructions:
1. Park your vehicle on a level surface and turn off the engine. Be sure to depress the parking brake.
2. Open the rear liftgate and remove the two screws that secure the taillight assembly to the body of the vehicle.
3. Once the screws are removed, gently pry the taillight assembly away from the vehicle. Be careful not to drop it.
4. Locate the brake light bulb you need to replace and turn it counterclockwise to remove it.
5. Insert the new brake light bulb and turn it clockwise until it is snug.
6. Reinstall the taillight assembly by snapping it back into place and replacing the two screws.
7. Test the brake lights to make sure they are working properly.
