1. Remove the Door Panel:
- Use a pry tool or a flat-head screwdriver to gently pry off the plastic cover on the door handle.
- Remove any screws that are exposed once the plastic cover is removed.
- Remove the screws holding the door panel in place.
- Carefully pry off the door panel, starting from the bottom edge.
2. Locate the Broken Handle Mechanism:
- Once the door panel is removed, you will be able to see the interior door handle mechanism.
- The broken part is likely to be one or more of the plastic clips or rods.
3. Replace the Broken Part:
- Locate the replacement part for the broken handle mechanism (it can be found at automotive parts stores or online).
- Match the new part with the broken one and replace the broken component.
4. Test the Handle Mechanism:
- Slide the door panel back into place, but do not secure it with screws yet.
- Test the door handle to ensure it operates smoothly and securely.
5. Secure the Door Panel:
- Once you've confirmed that the handle is functioning properly, replace the screws that hold the door panel in place.
- Reattach the plastic cover over the door handle.
6. Test the Handle Again:
- Ensure that the door handle is firmly secured and fully functional.
The exact process may vary depending on the specific model and year of the Honda Accord, so it's always a good idea to consult your vehicle's repair manual or refer to online resources for specific instructions for your particular car model.
