- Spark plug socket wrench
- 5/8-inch spark plug wrench
- Pliers
- Gapping tool
- New spark plugs
Instructions:
1. Open the hood of the car and locate the spark plug wires. They are located on the top of the engine, near the front of the car.
2. Use the pliers to remove the spark plug wires.
3. Use the spark plug socket wrench to remove the spark plugs.
4. Repeat the process for the remaining spark plugs.
5. Check the gap of the new spark plugs before installing them. The gap should be between 0.052 and 0.056 inches.
6. Use the spark plug wrench to install the new spark plugs.
7. Replace the spark plug wires.
8. Close the hood of the car.
Tips:
- Make sure you disconnect the negative battery cable before beginning the process.
- Be careful not to drop any of the spark plugs or wires.
- If you have difficulty removing the spark plugs, you may need to use a breaker bar or a penetrating lubricant.
