1. Gather Necessary Parts:
- Traxxas Slash 4WD Conversion Kit (or individual components)
- 4WD Front and Rear Differential Assemblies
- 4WD Driveshafts
- 4WD Front and Rear Suspension Arms
- 4WD Hubs and Wheels
2. Disassemble the 2WD Slash:
- Remove the body, wheels, and tires.
- Disconnect the steering components.
- Remove the rear axle assembly and the front suspension arms.
3. Install the Front 4WD Components:
- Attach the 4WD front suspension arms to the chassis.
- Install the front differential assembly and secure it with the included screws.
- Connect the steering components to the servo.
4. Install the Rear 4WD Components:
- Attach the 4WD rear suspension arms to the chassis.
- Install the rear differential assembly and secure it with the included screws.
- Connect the driveshafts to the rear differential and front transmission.
5. Install the Wheels and Tires:
- Attach the wheels and tires to the 4WD hubs.
6. Complete the Build:
- Reinstall the body and any additional components that were removed during disassembly.
- Calibrate the steering and adjust the suspension settings as desired.
7. Test the 4WD System:
- Power on the Traxxas Slash and check the operation of the 4WD system by driving it on different surfaces.
Remember that the specific parts required and the installation process may vary depending on the exact Traxxas Slash model you have and the specific conversion kit you are using. It is recommended to refer to the instructions included with the conversion kit for detailed steps and compatibility information.
