Auto >> AutoSPT >  >> Auto Repair

How do you tighten chain on Honda 450r?

To adjust the chain on your Honda 450R, you'll need the following tools:

- A chain adjustment tool

- A 10mm wrench

- A 12mm wrench

- A pair of pliers

1. Park the bike on a flat surface and put it in neutral.

2. Turn the chain adjuster nuts counterclockwise until there is no play.

3. Ensure that the chain does not touch the swingarm.

4. Tighten the chain adjuster nuts clockwise until an adequate amount. If the chain adjustment tool can still fit between the chain and swingarm, you will need to tighten the nuts a bit more.

5. Reinstall the nuts and tighten them securely with the 10mm wrench and the 12mm wrench.

6. Use a pair of pliers to bend the locking tab down over the nuts to prevent them from coming loose.

7. Spin the chain several times and ensure it moves freely.

Auto Repair
How do remove 1996 Mercedes c280 factory RADIO? How do you replace the cam bearings on a 1996 Chrysler Sebring JXI with 2.5L V6?
Car Care
Vehicle Repossession: What Happens When Your Car Is Repossessed? 4 Benefits of Regularly Rotating Your Tires Now Russia Has Ripped Off Hummer With Strela SUV
Engine
What accident class is this if a forklift operator was killed when the she driving overturned on ramp descending? Is there a picture of the firing order for 1995 Camry 4 cylinder engine?
Electric Car
How do you park your car up a hill? What type of differential fluid does a 2001 dodge ram 1500 have? Why is there no electrical power in your 1998 ford f 150?
Autopilot
How do you set the timing on a Kawasaki 360 Prairie 4x4 ATV? How do you change rear right hand lens on vw touran?
Car Photos
How do you remove the back seat of 1970 Chevy Nova? 2006 Chrysler 300 fog lights fuse location? How do you open the trunk of a Porsche boxter without key?