The following components should be greased every 10 hours or 250 miles:
- Front A-arm lower pivot points at the chassis side.
- Front suspension radius rod joints.
- Rear suspension lower shock mount pivots.
- Rear suspension link pivot points at the chassis side.
- Steering tie rod ends.
- Ball joints.
- Drive shaft universals.
- Throttle linkage.
- Front brake cam pin.
- Rear brake linkage.
- Shift linkage (models equipped with automatic transmission).
- Parking brake linkage (models equipped with automatic transmission).
- Rear driveshaft splines.
- Swingarm pivot shaft.
