NOTE: Please follow all safety precautions as outlined in your motorcycle's service manual.
Step 1: Gather the necessary tools and parts.
Tools:
- Phillips head screwdriver
- Flathead screwdriver
- 5/16-inch hex key
- Fuel filter wrench or channel-lock pliers
Parts:
- New gas filter (Harley Davidson part number: 62106-99B)
Step 2: Locate the fuel filter.
The fuel filter is located on the left side of the motorcycle, mounted to the frame near the fuel tank.
Step 3: Disconnect the fuel line from the filter.
Use a flathead screwdriver to loosen the hose clamp securing the fuel line to the filter. Grip the fuel line with a rag and pull it off the filter nipple. Be ready to catch any spilled fuel.
Step 4: Unscrew the fuel filter from the mount.
Use a Phillips head screwdriver or a 5/16-inch hex key to loosen and remove the bolts holding the fuel filter to the motorcycle's frame.
Step 5: Remove the old fuel filter.
Twist and pull the fuel filter off the fuel line nipple, being careful not to spill any fuel.
Step 6: Install the new fuel filter.
Push the new fuel filter onto the fuel line nipple and ensure a snug fit. Hand-tighten the fuel line clamp to secure it in place.
Step 7: Reattach the filter to the mount.
Align the filter with the mounting bracket and insert the bolts. Hand-tighten the bolts and use the appropriate tool (screwdriver or hex key) to tighten them securely.
Step 8: Reconnect the fuel line to the filter.
Grip the fuel line and push it onto the filter nipple, ensuring a snug fit. Use the flathead screwdriver to retighten the hose clamp.
Step 9: Test the fuel system for leaks.
Turn on the ignition and inspect the fuel line and filter for leaks. If there are any leaks, tighten the hose clamps further.
Step 10: Start the motorcycle and check for proper operation.
After ensuring that there are no leaks, start your motorcycle and check that it runs smoothly without any issues.
Remember, if you are uncomfortable performing this procedure or do not have the necessary tools, it is best to seek assistance from a certified motorcycle mechanic or consult the service manual for your specific model.
