1. Park the vehicle in a safe location and apply the parking brake.
2. Safely disconnect the battery ground cable to avoid any electrical hazards during the repair.
3. Remove the upper engine covers and timing belt covers to access the cambelt and related components.
4. Set the engine to top-dead-centre (TDC) position using the appropriate timing marks.
5. Loosen the tensioner bolt and remove the old cambelt.
6. Install the new cambelt, making sure to align it correctly with the timing marks.
7. Re-tighten the tensioner bolt to the specified torque.
8. Double check the timing marks to ensure that the cambelt is installed correctly.
9. Reinstall the timing belt covers and upper engine covers.
10. Reconnect the battery ground cable and test the engine to ensure proper operation.
It's important to note that this is a complex and time-consuming procedure and mistakes can have serious consequences for your engine. If you are not confident in your mechanical abilities, it is recommended to have this work done by a professional mechanic.
