Step 1: Insert the key into the ignition and turn it to the "On" position.
Do not start the engine.
Step 2: Press and hold the "000" button on the instrument panel.
The button is located on the left side of the speedometer, just below the "Info" button.
Step 3: While holding down the "000" button, turn the ignition key to the "Start" position.
The engine will start and the service indicator will begin to flash.
Step 4: Continue to hold down the "000" button until the service indicator stops flashing and the display reads "0000".
This may take a few seconds.
Step 5: Turn the ignition key back to the "Off" position.
The service indicator has now been reset.
Step 6: Remove the ignition key from the ignition switch.
Your service indicator has been reset.
