1. Disconnect the battery. This is an important safety precaution that will help to prevent any electrical accidents.
2. Remove the door handle bezel. There are two screws that hold the bezel in place. Once you have removed the screws, pry the bezel off carefully with a flat-head screwdriver.
3. Remove the window switch panel. There are two screws that hold the panel in place. Once you have removed the screws, pry the panel off carefully with a flat-head screwdriver.
4. Remove the speaker grille. There are two screws that hold the grille in place. Once you have removed the screws, pry the grille off carefully with a flat-head screwdriver.
5. Remove the door pull handle. There is one screw that holds the handle in place. Once you have removed the screw, pry the handle off carefully with a flat-head screwdriver.
6. Remove the door lock knob. There is one screw that holds the knob in place. Once you have removed the screw, pry the knob off carefully with a flat-head screwdriver.
7. Remove the screws that hold the door panel in place. There are six screws that hold the panel in place. Three of the screws are located on the top of the panel, two are located on the bottom of the panel, and one is located on the side of the panel.
8. Pry the door panel off carefully. Once you have removed all of the screws, pry the door panel off carefully with a flat-head screwdriver. Be careful not to damage the door panel.
The front door panel should now be removed. You can now access the door lock mechanism, window regulator, and speaker.
To reinstall the door panel, simply follow these steps in reverse order.
