- Car jack
- Jack stands
- Socket set
- Wrench set
- Pry bar
- Hammer
Instructions:
1. Park your Peugeot 406 on a flat surface and engage the parking brake.
2. Jack the car up and support it on jack stands.
3. Remove the lug nuts and wheels from both front wheels.
4. Use the pry bar and hammer to pry the driveshaft loose from the transmission on both sides.
5. Use the socket and wrench set to remove the bolts that hold the driveshaft to the rear differential.
6. Slide the driveshaft out from under the car.
Tips:
- Make sure that the parking brake is engaged before you start working on the car.
- Be careful not to damage the transmission or differential when prying the driveshaft loose.
- Use a impact wrench to loosen the lug nuts on the front wheels.
