Gather the necessary tools and parts:
- Replacement flasher bulb for the side mirror
- Small flathead screwdriver or trim removal tool
- Optional: Rubber gloves for safety
1. Preparation:
- Park your vehicle in a safe location.
- Turn off the engine and allow your car to cool down.
- If possible, turn on your hazard lights to increase visibility.
2. Locate the Side Mirror Housing:
- Identify the side mirror that requires the flasher replacement.
- Gently grip the edge of the mirror housing and pull it towards you to detach it from the vehicle body.
- Be cautious as the housing might be secured by clips or plastic rivets.
3. Access the Flasher Bulb Holder:
- Once the housing is detached, you should see the flasher bulb holder. It's usually a small, round, or rectangular compartment.
- Some mirror housings may require you to remove a cover or protective cap to access the bulb holder.
4. Remove the Old Flasher Bulb:
- Use a small flathead screwdriver or a plastic pry tool to carefully pry open the bulb holder.
- Be cautious not to damage the bulb holder or surrounding components.
- Remove the old flasher bulb from the socket.
5. Install the New Flasher Bulb:
- Take the replacement flasher bulb and insert it into the socket within the bulb holder.
- Make sure the bulb is securely in place.
- If necessary, gently twist or push the bulb until it sits firmly in the holder.
6. Reattach the Bulb Holder (Optional):
- If you had to remove the bulb holder to access the bulb, carefully reattach it to the mirror housing. Ensure it securely snaps into place.
7. Reattach the Mirror Housing:
- Grasp the mirror housing and align it with the vehicle's side mirror mount points.
- Gently push the housing until it clicks back into place or until the securing clips or rivets engage.
- Ensure that the housing is firmly secured to prevent it from coming loose.
8. Test the Flasher:
- Start the vehicle and turn on the hazard lights to test the new flasher bulb.
- Ensure the flasher is working properly and signals when activated.
9. Clean Up:
- Dispose of the old flasher bulb properly.
- If you used rubber gloves, discard them after use.
Remember, if you encounter difficulties or uncertainties, it's always a good idea to refer to the specific instructions for your Mercedes Benz C320 model or seek assistance from a professional.
