1. Gather Tools:
- Replacement Side Mirror
- Socket Wrench Set
- Flat-head Screwdriver
- Towel
2. Power Down:
- Turn off the engine and ensure the power is off.
3. Locate Mirror Housing:
- Identify the damaged or malfunctioning side mirror.
4. Remove Housing Cover:
- Use a flat-head screwdriver to pry open and remove the cover or cap on the inside of the door panel at the mirror's base.
5. Disconnect Wiring:
- Locate and disconnect any electrical connectors.
6. Remove Nuts:
- Use the socket wrench to remove the nuts or bolts securing the side mirror housing to the door panel.
7. Remove Old Mirror:
- Carefully detach the old side mirror housing from the door panel.
8. Disconnect Heated Seat Wiring (if applicable):
- If the side mirror has heated seat wiring, disconnect it.
9. Prepare New Mirror:
- Transfer any electronics or heating components (if applicable) from the old mirror to the new one.
10. Install New Mirror:
- Carefully position the new side mirror into place, ensuring proper alignment with the door panel.
11. Secure Mirror Housing:
- Reinstall the nuts or bolts to secure the new side mirror housing to the door panel.
12. Reconnect Wiring:
- Reconnect the electrical connectors that you previously disconnected.
13. Replace Housing Cover:
- Snap the cover or cap back into place on the inside of the door panel.
14. Test Mirror:
- Check that the new side mirror is properly adjusted and working correctly.
15. Secure Towel:
- Place a towel underneath the mirror to prevent it from hitting the ground during adjustments.
Remember, while these steps provide a general guide, the specific procedures may vary depending on the year and model of your Mercedes Benz C230. Refer to a vehicle-specific repair manual for more precise instructions and safety precautions. If you are uncomfortable performing these repairs yourself, it's best to seek assistance from a qualified professional.
