1. Park your car in a well-lit area and turn off the engine.
2. Open the hood of your car.
3. Locate the headlight assembly that needs the bulb replaced.
4. Remove the rubber cover from the back of the headlight assembly.
5. Use a Phillips head screwdriver to loosen the three screws that hold the headlight assembly in place.
6. Remove the headlight assembly from the car.
7. Disconnect the electrical connector from the back of the headlight assembly.
8. Remove the old headlight bulb by turning it counterclockwise.
9. Install the new headlight bulb by turning it clockwise.
10. Reconnect the electrical connector to the back of the headlight assembly.
11. Reinstall the headlight assembly into the car and tighten the three screws.
12. Replace the rubber cover on the back of the headlight assembly.
13. Close the hood of your car.
Tips:
- Make sure that you purchase the correct replacement bulb for your car.
- Be careful not to drop the headlight bulb.
- If the bulb does not light up, check to make sure that the electrical connector is properly connected.
