Gather the following items:
- A paper clip or small metal rod
- A key that works in the ignition of the Peugeot 406
1. Turn the ignition to the "On" position and wait 30 seconds.
2. Insert the paper clip or small metal rod into the reset button located in the center of the instrument panel.
3. Hold the paper clip or metal rod in the reset button for 15 seconds.
4. Turn the ignition to the "Off" position and wait 15 seconds.
5. Insert the working key into the ignition and turn it to the "On" position.
6. The electronic immobilizer should be reset and the car should start.
If the car still does not start, repeat steps 2 through 6.
Additional tips:
1. Ensure the paper clip or small metal rod is clean and free of dirt or debris before using it to reset the immobilizer.
2. Insert the key into the ignition as far as it will go before turning it to the "On" position.
Here are some additional tips that may be helpful:
- If the car still does not start after trying the above steps, you may need to have it towed to a qualified mechanic.
- The electronic immobilizer is a security feature designed to prevent the car from being stolen. If you are having problems with the immobilizer, it is important to have it repaired as soon as possible.
- The Peugeot 406 electronic immobilizer can also be reset using a diagnostic tool. If you have access to a diagnostic tool, you can follow the instructions in the tool's manual to reset the immobilizer.
