- Phillips head screwdriver
- Flathead screwdriver
- T25 Torx screwdriver
Instructions:
1. Open the rear door.
2. Remove the two Phillips head screws located in the door handle recess.
3. Use a flathead screwdriver to pry up the plastic cover located at the bottom of the door panel. Remove this cover.
4. Remove the two Phillips head screws located behind this plastic cover.
5. Remove the T25 Torx screw located in the door pull handle.
6. Use the flathead screwdriver to pry up the door panel from the bottom, working your way up the sides. Disconnect the electrical connector for the window switch as you go.
7. Lift the door panel up and off the door.
