* A ratchet
* A socket set
* A Phillips head screwdriver
* A flat head screwdriver
Instructions:
1. Open the door that you want to adjust.
2. Locate the door hinges. There are two hinges on each door, one at the top and one at the bottom.
3. Use the ratchet and socket set to loosen the bolts that hold the hinges in place. Do not remove the bolts completely.
4. Use the Phillips head screwdriver to turn the adjustment screw on the top hinge. Turning the screw clockwise will raise the door, and turning it counterclockwise will lower the door.
5. Use the flat head screwdriver to turn the adjustment screw on the bottom hinge. Turning the screw clockwise will move the door towards the front of the truck, and turning it counterclockwise will move the door towards the back of the truck.
6. Once you have adjusted the door to the desired position, tighten the hinge bolts.
7. Repeat steps 3-6 for the other door.
Tips:
* If the door is sagging, you will need to tighten the hinge bolts.
* If the door is rubbing against the body of the truck, you will need to loosen the hinge bolts and adjust the door position.
* Be careful not to over-tighten the hinge bolts. This could damage the door or the hinges.
