1. Clean the surface: Thoroughly clean the affected area using a mild detergent and water to remove any dirt, grease, or debris. Make sure the surface is completely dry before proceeding.
2. Sand the area: Use a fine-grit sandpaper (around 220-grit) to lightly sand the peeling area. This will help to smooth out the surface and provide a better base for the repair.
3. Apply a plastic primer: Apply a thin coat of plastic primer to the sanded area. This will help the paint to adhere better to the plastic. Allow the primer to dry completely according to the manufacturer's instructions.
4. Paint the area: Use a chrome-effect spray paint to paint the affected area. Apply several thin coats, allowing each coat to dry completely before applying the next.
5. Clear coat: Once the paint is dry, apply a clear coat to protect the finish. This will help to prevent the paint from peeling or chipping in the future.
6. Polish the area: Once the clear coat is dry, use a soft cloth to polish the area. This will help to remove any excess clear coat and give the surface a smooth, glossy finish.
It's important to note that if the peeling is extensive or the plastic is damaged, you may need to replace the door handles altogether. Additionally, if you are not comfortable performing this repair yourself, you can consult with a professional auto body shop for assistance.
