* New transmission fluid (SAE 10W-40 or as recommended in the owner's manual)
* A drain pan
* A funnel
* A wrench
Here are the steps on how to change the transmission fluid on a Honda Rebel 250:
1. Warm up the engine for a few minutes to help make old transmission fluid flow more easily.
2. Turn off the engine and locate the transmission oil drain bolt on the bottom of the bike.
3. Place the drain pan under the drain bolt and loosen the bolt with the wrench.
4. Allow the old transmission fluid to drain completely.
5. Retighten the drain bolt.
6. Locate the transmission oil fill hole on the top of the bike.
7. Remove the oil fill plug.
8. Insert the funnel into the oil fill hole.
9. Add the new transmission fluid slowly until it reaches the proper level, as indicated on the dipstick.
10. Reinstall the oil fill plug.
11. Start the engine and let it run for a few minutes to circulate the new transmission fluid.
12. Check the transmission fluid level again and add more fluid if necessary.
That's it! Changing the transmission fluid on a Honda Rebel 250 is a quick and easy task that you can do yourself. By following these steps, you can help to keep your bike running smoothly for many years to come.
