How do you fix Honda diagnostic code p0336 with out registering to a website?

The P0336 trouble code is for the Crankshaft Position Sensor A Circuit Malfunction. The first step to fixing the code is to inspect the sensor and its wiring for any damage. If there is any damage, it will need to be repaired. You will need to check the gap between the sensor and the reluctor ring. If it needs to be adjusted you can use a non-metallic feeler gauge to adjust it. If there is no physical damage to the sensor or its wiring, then the code may be due to a problem with the sensor itself. There are a few different ways to fix the code, depending on the cause of the problem. It is possible that cleaning the sensor will fix the issue. If the sensor is faulty or the sensor mounting surface has become excessively dirty, then it will need to be replaced. If the problem persists after replacing the sensor, then it may be due to a problem with the wiring or the ECM. In this case, you will need to consult a qualified technician for further assistance.