- Wrench set
- Socket set
- Jack and jack stands
- New motor mounts
- Thread locker
Instructions:
1. Park your vehicle on a level surface and turn off the engine.
2. Engage the parking brake.
3. Raise your vehicle using a jack and jack stands, being sure to place the stands under the vehicle's frame.
4. Locate the motor mounts, which are typically located on the sides of the engine, connecting it to the vehicle's frame.
5. Remove the nuts and bolts securing the motor mounts to the engine and frame.
6. Remove the old motor mounts from the vehicle.
7. Install the new motor mounts by aligning them with the mounting holes on the engine and frame.
8. Insert the nuts and bolts and tighten them securely.
9. Lower your vehicle using the jack and jack stands.
10. Apply thread locker to the nuts and bolts to prevent them from loosening.
Note: Some vehicles may require the removal of additional components to access the motor mounts. Be sure to follow your vehicle's specific repair manual for detailed instructions.
