Rear Handle
1. Locate the two chrome caps on either side of the handle.
2. Pry off the caps with a flat-head screwdriver or similar tool.
3. Remove the two retaining screws under the caps.
6. Remove the handle by pulling it straight out.
Front Handle
1. Locate the Phillips-head screw located above the handle.
2. Remove the Phillips head screw
3. Remove the remaining retaining nut at the bottom of the handle.
4. Remove the handle by pulling it straight out.
Note: If your door handles are rusted or corroded, you may need to use a penetrating lubricant to help loosen them up.
