- A Phillips head screwdriver
- A flat head screwdriver
- A socket wrench set
- A pry bar
1. Begin by removing the two screws that hold the subwoofer grille in place. The screws are located on the top and bottom of the grille.
2. Once the screws are removed, use the flat head screwdriver to pry the grille off of the subwoofer.
3. Next, use the socket wrench set to remove the four bolts that hold the subwoofer in place. The bolts are located on the sides and bottom of the subwoofer.
4. Once the bolts are removed, use the pry bar to pry the subwoofer out of the enclosure.
5. Be careful not to damage the subwoofer or the enclosure while prying it out.
6. Once the subwoofer is removed, you can disconnect the wiring and remove it from the vehicle.
