- Ratchet
- Socket set
- Flathead screwdriver
- Phillips head screwdriver
- Pliers
Instructions:
1. Open the hood of your car.
2. Locate the two bolts on the top of the hood, near the windshield.
3. Use a ratchet and socket to loosen the bolts.
4. Once the bolts are loose, use a flathead screwdriver to pry up the plastic covers over the bolts.
5. Remove the bolts.
6. Locate the two bolts on the bottom of the hood, near the grille.
7. Use a ratchet and socket to loosen the bolts.
8. Remove the bolts.
9. Lift the hood up and off of the car.
10. Remove the old hood by disconnecting the cables.
11. Install the new hood by connecting the cables.
12. Lower the hood onto the car.
13. Replace the bolts on the bottom of the hood.
14. Tighten the bolts.
15. Replace the plastic covers over the bolts.
16. Replace the bolts on the top of the hood.
17. Tighten the bolts.
18. Close the hood of your car.
