- 10mm socket
- 13mm socket
- 15mm socket
- Ratchet
- Breaker bar
- Extension
- Safety glasses
Instructions
1. Locate the starter. The starter is located on the driver's side of the engine, near the bottom. It is a cylindrical-shaped object with two electrical terminals on the top.
2. Disconnect the negative battery cable. This is important to prevent any electrical shock while working on the starter.
3. Disconnect the electrical terminals from the starter. There are two electrical terminals on the top of the starter. Use a 10mm socket to loosen the bolts that hold the terminals in place, and then disconnect the terminals.
4. Remove the starter mounting bolts. There are three starter mounting bolts. Use a 15mm socket to loosen the bolts, and then remove them.
5. Remove the starter. Once the mounting bolts are removed, you can remove the starter by pulling it straight out of the engine.
6. Inspect the starter. Once the starter is removed, inspect it for any damage or wear. If the starter is damaged, it will need to be replaced.
7. Reinstall the starter. If the starter is not damaged, you can reinstall it by following the steps in reverse order. Be sure to tighten all of the bolts and terminals securely.
8. Reconnect the negative battery cable. Once the starter is reinstalled, you can reconnect the negative battery cable.
Here are some additional tips for removing a starter:
- Make sure that you have the right tools. The most important tool for removing a starter is a breaker bar. A breaker bar will give you the extra leverage you need to loosen the starter mounting bolts.
- Be careful not to drop the starter. The starter is a heavy object, and it can easily damage your foot or hand if you drop it.
- If you are not comfortable removing the starter yourself, you can take your car to a mechanic to have it done.
