- Lug wrench
- Jack and jack stands
- Socket wrench set
- Flathead screwdriver
Instructions:
1. Park your vehicle on a level surface and engage the parking brake.
2. Loosen the lug nuts on the front wheels, but do not remove them completely.
3. Use a floor jack to raise the front end of the vehicle off the ground. Support the vehicle on jack stands placed under the pinchweld, behind the front wheels.
4. Remove the lug nuts and take off the front wheels.
5. Use a flathead screwdriver to pry off the dust cap in the center of the rotor.
6. Use a socket wrench set to remove the caliper bracket bolts.
7. Remove the caliper bracket and caliper from the rotor.
8. Use a flathead screwdriver to pry off the rotor from the hub.
9. Remove the rotor from the hub.
