Materials Needed:
- New rear wiper blade (the suitable size for the 2006 Highlander is typically 12 inches)
- A clean cloth
Steps:
1. Prepare the New Wiper Blade: Remove the new wiper blade from its packaging and check to ensure it's the correct size. Some wiper blades may have a protective cover, so remove that as well.
2. Locate the Release Button: Open the rear liftgate/trunk of your Highlander. Find the release button for the rear wiper blade. This is usually located near the base of the wiper arm.
3. Press and Lift the Release Button: Press the release button and gently lift the wiper arm and blade upwards until it is perpendicular to the window glass.
4. Remove the Old Blade: While holding the wiper arm, slide the old wiper blade off the hook or connector on the wiper arm.
5. Clean the Wiper Arm: Take the opportunity to clean the wiper arm using the cloth. Wipe away any dirt or debris from the arm to ensure proper contact between the new wiper blade and the window glass.
6. Attach the New Blade: Slide the new wiper blade onto the hook or connector on the wiper arm, ensuring that it snaps into place securely.
7. Test the Wiper Blade: Lower the wiper arm back to its original position. Then, turn on the rear wiper switch to test the new blade. Make sure it moves smoothly and contacts the window glass properly.
8. Dispose of the Old Blade: Properly dispose of the old wiper blade according to your local regulations or recycling guidelines.
Remember, always refer to your vehicle's owner's manual for specific instructions related to your model and year of the Toyota Highlander. If you're unsure or uncomfortable performing this task, you can always consult a professional mechanic or auto service center.
