- Phillips head screwdriver
- Flat head screwdriver
- Small pry bar
- Small pliers
Instructions:
1. Open the door and remove the two screws that are located on the bottom of the door panel.
2. Remove the two screws that are located on the side of the door panel, near the door handle.
3. Use a flat head screwdriver to pry off the door handle cover.
4. Use a small pry bar to pry off the window crank cover.
5. Use a small pliers to remove the two clips that are holding the door panel in place.
6. Gently pry the door panel away from the door.
7. Disconnect the electrical connectors that are attached to the door panel.
8. Remove the door panel.
Note: Be careful not to break the clips that hold the door panel in place.
